Ski BootCam
Ever fancied getting some great shots from the point of view of your Ski boot? while you pull off your next big trick, go back country skiing, or simply laze about on-piste. Well Ed, Explains a simple way of being able to do such a thing You may have seen some videos on this site, that show the point of view from my ski boot, well, here is the secret to how we done it. BootCam Is pretty simple and only takes 10-15minutes to setup and get going – Provided you have all the equipment. Disclaimer: It can be extremely dangerous attaching camera equipment to yourself while you participate in extreme sports such as skiing. Extreme care should be taken to prevent you from injury if the unthinkable were to happen. You take on all risk, as your own. We cannot be responsible for any injury that might occur. You will need: · A Ski Boot · A Small Security type video camera, with a battery –Available from http://www.maplins.co.uk/ · Some gaffer tape · Cable ties · FrostyGear, Cam1 (Goldstar Personal Mini Video Camera System) – Available from http://www.frostygear.co.uk/. Or a Video camera with AV input. · An extra pair of hands The security camera needs to be water proof. The security camera I used is only slightly water resistant, after about 30mins of use while skiing, the picture seems to break up. So it might be worth hunting around for a fully waterproof mini security camera.
The first part is to feed the security camera down one of your legs, inside your ski pants/ trousers. Make sure that the lead is long enough and slack, so that when your knees are fully bent, the wire is free to move and does not feel tight. The wire needs to be long enough to go from the bottom of your feet to the top of your head.
Now you need to slip your ski boot on. Feed the security camera wires through the Velcro strap, and some of the clips, making sure that when the clips are fastened they do not damage the video cable. Position the camera at the tip of the boot, or near the clip at the tip of the boot. Make sure that there are no loose wires around the boot – Use cable ties to securely fasten the camera and the cable to the boot. Make sure that the boot can be unclipped and released at anytime.  At this point it might be worth hooking up the camera to the FrostyGear CAM1 DVR, or video camera, to make sure the camera is pointing in the right direction. When you are happy the camera is in the right direction, you can then secure it with Gaffer Tape. Make sure though that the gaffer tape does not impede access to the ski boot clips, or binding when attached to your ski. You may need somebody else to help tape the camera to the boot – It’s easiest if you use small strips of tape. 
If not done so already connect the PP9 battery to the security camera and the Yellow, and white lead to the DVR cable. Turn on the DVR and make sure everything is working. You are now set. It’s best to place the DVR in the Inside pocket of your jacket, make sure that there is enough slack on the cable, and it can move freely around your leg and body.
It don't look that pretty, but it does the job! Now you’re ready to film your next big trick, from the POV (Point Of View) of your boot! Awesome, Just make sure you hit record... |